If you have a very careful and we are confident in your ability to do it yourself projects, you can install the shower tray. However, if you're not, then you can always hire the services of a professional bathroom designers to do the installation for you.
Here is the step-by-step process of installing the shower tray itself.
Once you have your shower, you need to choose if you want on the floor or lie on a flat base or stand elected.With the choice on the floor, you must create a space at the bottom of the siphon. Choosing the latter, the base can be created with plywood. So make sure, however, that there is enough space for the trap.
Now you have made your choice, make the area where you install the shower base plate and also with the use of sand and cement. You can also use a bed of sealant. This can only help seal leaks water from the soil, but is always in the showerPlace.
The next thing to do is to put your shower on the flat plate concrete floor sealer or read. It must not tilt to one side as the shower is already inclined to run the water on one side.
Subsequently, the traps placed under the shower base, firmly attached to the main line from the waste stream. If you have asked for your shower on a basis that can be used as a cover on the baseboard trap. But always make sure that you can easily accesssiphons.
Now that the shower tray is flat and even on the base, it is now possible to tile the walls around the shower. This is done last, because if you tile the walls before the shower, may still have some gaps and these gaps so that the loss of water on the sides. Always the last tile walls to waterproof the shower area.
0 comments:
Post a Comment